This is the wiring up of the new solenoid,wirless remote plus hand remote.

I have taken many pictures to make this as simple as possible

THE FIRST 4 PICTURES ARE OF OUR OLD SOLENOID WE ARE REPLACING

THE 2ND RED LEAD IS THE LONG ONE THAT GOES TO THE BATTERY

YELLOW WAS ON THE 1ST TERMINAL

 ON THE TOP OF MOTOR CLOSEST TO THE DRUM

BLACK WAS ON THE 2ND TEMINAL ON THE TOP OF MOTOR

RED WAS ON THE TERMINAL ON TOP OF MOTOR CLOSEST TO THE END

OF THE WINCH MOTOR

NEW SOLENOID

1ST TERMINAL HAS YELLOW

2ND TERMINAL IS THE LONG RED

3RD IS THE RED WHICH GOES ONTO THE LAST TERMINAL

CLOSEST TO THE END OF THE WINCH

4TH IS THE BLACK WHICH IS ON THE 2ND TERMINAL

ON THE WINCH MOTOR

BELOW IS THE LONG RED LEAD

TERMINAL ONE

TERMINAL THREE

TERMINAL TWO

WIRELESS REMOTE & HAND REMOTE

The brown lead is from the hand remote and the white is from the wireless remote both on the 1st terminal.

Now below we have the 2 red leads one from the wireless remote and one from the hand remote

They are both going onto the top of the solenoid with the long red lead that goes to the battery.

Below we have the black from wireless going to the middle of the small terminals

And finally we have the yellows going to the  last terminal of the small ones

WIRING DIAGRAM

ANY FURTHER ASSISTANCE RING BEN 0424256939

THE BELOW DIAGRAM

IS IF YOUR WINCH ONLY HAD 2 TERMINALS

REVERSE POLARITY